Speaker pursuit road > the tool top of speaker production >

Wood working machines whom Oyama uses on business

Pin Tucker

It chiefly uses it for a temporary stop when the board is bonded. Workmen often make a mistake in this, strike to the finger, and scream. You may use that by general because it is essentially the same as the temporary stop nail.

Air Tucker

It uses it for a temporary stop when this also bonds the board. Tucker only has to think the stapler to be large though pin Tucker is [kugijou]. Pin Tucker and air Tucker are used properly by the place. If it is a soft tree, it is possible to use it for a temporary stop to some degree by the manual one sold in the do-it-yourself store etc.

[Handoru-ta-]

The diameter of the bit that can be used is used and the one of 12mm can be used for the router for the trimmer 6mm though trimmer's principle of operation is the same. In addition, there are trimmer's twice or more, and the output can be used even to build a large-scale table and construction widely.

Drilling machine

Machine to puncture it vertically in drill. There is never a disadvantage if person's one doing the speaker production and woodwork frequently even if it has it. A small bench drilling machine sells for about 20,000 yen in the do-it-yourself store and it is surprised. The dignifiedly heavy one is good.

Crossing rim saw

It is the most popular one in the table in the machine for the [kogatsuita] woodwork of Maru. If it is plywood [ka], an accurate cutting can be almost done with this one. It is this machine that it is the most dangerous in the wood working machine, and the probability of causing accidents most is high. There are the person's who drops his finger with this machine counting and not cutting to the woodwork industry a lot. After it determines it like this, the person who uses this should use it.

Going up and down board(table saw)

What I use every dayWhen the portrait one is chiefly spared to the portrait, the usage is used. It is this machine that it is the most dangerous in the wood working machine, and the probability of causing accidents most is high. There are the person's who drops his finger with this machine counting and not cutting to the woodwork industry a lot. After it determines it like this, the person who uses this should use it.

Flash press

Machine for woodwork that can put strong pressure of 20t on. An extra super-strong pressing to the sound road part when bonding and BH of plywood are made becomes possible if this is.

Automatic plane

It uses it to cut down the thickness of the board. It uses it to plane the purity material basically. It hardly appears in the speaker production.

NC router

The luxury model of a speaker on the market seems also to have the one that costs about 50 million yen according to the one to handle the phase processing etc. stiffly with this machine (It is necessary to read the pamphlet of B&W).

Hand stroke belt sander

It uses it to process the phase. The sleeve etc. of clothes are rolled and a considerably dangerous machine though the treatment is not too difficult.

[Paneruso-]

When the board is cut in the do-it-yourself store, it cuts it to most use of this [paneruso-]. The establishment injured even if the amateur uses it as the treatment is also easy is low. The person of the price who has it in the woodwork shop that does high at an individual level is rare.