Speaker pursuit road > the technological chapter of woodwork top of Oyama [mikioto] >
Advance preparation and arrangements of assembly
It is assembly work to assemble plywood with the bond finally when the board is bought. In the work of the speaker production, arrangements are lives. After feelings to be made early are restrained and the following items are confirmed, let's begin work.
All necessary things are prepared.
When you decide what kind of speaker you make, you may buy everything putting a day after the tool for material (unit terminal and internal wiring etc) needed production is listed and arrange it. Time passes [itteiru] and [attoi] [kan] the [areganaikoreganai] and [kada] doing after it produces.Place where speaker is assembled
Space is considerably needed for the assembly of the speaker. It is efficient when the work space is widely taken and it does when working in the room. In addition, because it grows serious if the wood working machine, especially the Sanda trimmer is handled in the room, we will recommend work on the outside. Paint outside.Wood is temporarily united.
Unite the board that has been bought temporarily. The order [shita] parts can confirm to accuracy whether it is a coming big bur by the thing temporarily united. whether everything is(There are uncommonly parts when wrong. )When the accuracy about which it talks with the shop has not gone out to the start, let's have putting the complaint in the shop and the exchange.
Parts are numbered.
If the number falls in parts in the blueprint, and it is assembled to the speaker of the Nagaoka master design sequentially, it is ok. Because work makes progress very much as for this number when writing in the part where the board is not seen, the pencil or the care tape is numbered and it puts it.
It is possible to settle.
This is to draw the line at the bonded place. Because an internal sound road part disappears almost in backing loading horn type speaker excluding open regio oralis, let's draw the line at the bonded place beforehand with the felt-tipped marker of narrowing. Taking out the scale whenever bonding becomes serious time.
About the assembly order
The assembly order is attached to the blueprint in the speaker from which the Nagaoka teacher is designed. �@It is ..+ �A +�B + +������� (�C + �D).. guy. Parts that attach parentheses are supposed to be assembled previously and, besides, if parts are sequentially assembled, completed. I think that it is OK if this assembly order is made a reference level. The correction will only have to be united temporarily first of all as it is teacher's number and to be added so that I may do easily.
Assembly : 2 pieces in the progress simultaneously.
It is easy to do the speaker when completing another after it completes it by one makes right and left two from the progress simultaneously. It is because pressure can be put alternately ..two.. repeated when the weight is put on parts because or there is the one that becomes a pair at nail [uchiwosuru].
About the terminal
It is necessary to note it because a terminal, demon [tsumenatto], and internal wiring, etc. have the one that doesn't cling either if it doesn't install it when plywood is assembled. It becomes impossible to install nuts if it doesn't apply it before anything is put on the baffle especially.
