Speaker pursuit road > unit terminal the chapter top >

How to install nut with fingernail

  Because you may not become severe, the installation of the nut with packing is easy in positioning like [onimenatto]. However, because it is not possible to install it in the table of the baffle, [kado] that protrudes for should the installation of the speaker before it assembles it and the small caliber baffle might have to be planed.

	Hole opening to baffle first of all. Positioning is polite.
	It pierces with a drill.
	The hole of the size that the nut with packing passes is made. Attention of causing sound leakage when it is too large
	It puts it beating the nut with packing with the hammer. To the other side of the baffle.
	Everything was crowded.
	The unit is installed.
	When seeing from the other side. There is a possibility that the position of the nut with the fingernail shifts when the screw of the unit doesn't shut well. If the nut is removed once in that case, the drill is appropriated to the same hole, and the hole is expanded a little, it needs ..good...

Supplementation..pack..nut..install..detach..repeat..do..nut..loosen..shake.For that case, you may use the instant adhesive by one drop.