Speaker pursuit road > woodwork painting technology the chapter top >
Painting 3 of specular urethane to D-88
Sanding (Sanda) # 280
 | To obtain a smooth paint film, urethane sanding sealing coat �� sanding is repeated. |
 | A Swan speaker comes to have to do the place where shape cannot handle the machine with bumpy [shiteiruno] by the hand work. |
 | A white powder is Cass after the paint film is planed. It is necessary to note it because the paint film will still be planed to the area of pigmented material when Sanda is put too much here because it is not too thick. |
Touch-up
 | The bond of ..painting term 'Touch-up'.. woodwork is work that not being possible the wipe to take paints put the color on the part in which it doesn't field well with a brush. |
 | The combination named [taitobondo] + [finrandoba-chi] was bad or quite a large amount of paste has been put out this time. It is painted well and it exists. |
 | This work may be called a workman art that the amateur cannot mimic. It is not the one that can be done at one evening in one morning though [hi] by which the president was able to begin to draw even grain was taught either. |
 | Wall valley who thinks about the next process because it sees paints paste. The woodwork painting is the one (it is necessary to change the following process by the state of the temperature and the humidity on the smoothness degree and the day of the state and the paint film of the groundwork and not going like the manual it). |
The second of intermediate coats
 | A professional woodwork painting workman seems to use it properly according to the amount in which do the atomization of three cancer at the urethane painting. |
 | It is the second of the intermediate coats. |
 | The paint film is increased due to cancer for thick coating still the paint film thin. |
 | I remember to be very difficult because it is complex shape though I experienced the flamingo ahead by the cancer painting. It digests to say nothing of wall valley without difficulty. |
The third of intermediate coats
 | The urethane sanding sealing coat is painted again and it goes between the third times from the second times without Sanda repeatedly. |
 | Seeing decreases, and paints come to drip at once because of doing paints when the paint film follows to some degree. |
 | Is it understood that the paint film followed?[Toiu] [**tayo] is painted from [shitanodekoko] further and it goes as much as possible in a thick paint film repeatedly this time though it goes for finish as follows in the intermediate coat process by this level at usual specular painting. |
Sanding (Sanda) # 280
 | The pipe of this [finrandoba-chi] is not too deep, and there is already an inhalation of paints hardly. In addition, the paint film made once to make the paint film hot it it it of it it of it of it of it of it is planed and it keeps smooth. |
 | Wall valley;"The paint film is so thickened and do very. " Oyama;"It is a sound. " Wall valley;�???� |
 | It is a large-scale heater that it is reflected behind the photograph. As for painting, the temperature seems to warm with the heater, to paint, and to bring the speed of dryness forward when it is the most important and the temperature is low. |
