Production 3 of D-37

21
	(23+24)It drinks and parts are made. 23 boards (board in the back).
22
	24 boards (board of reinforcement) are bonded. The last bonding goes well when 24 moves some (About 0.5mm) boundaries of 23 and 24 boards from the boundary in the direction of a red arrow without exactly joining it.
23
	(25+26+27+28)It drinks and parts are made. Board 25 of bottom.
24
	26 boards are bonded.
25
	27 boards are bonded.
26
	28 boards are bonded. Whether it has settled exactly without the board is appropriated from a red arrow and 26, 27, and 28 boards shifting is confirmed. When here exactly attaches to the shroud, it becomes beautiful finished. The place with an important, red arrow finds the position that squarely appropriates the board and sticks exactly.
27
	When you temporarily unite parts in the sound road part.
28
	Board 29 on side. Parts are bonded to one shroud, and the other shroud is bonded at the end.
29
	(1+2+3+5+6)[Wo] bonding. The weight is put on and it puts on pressure.
30
	Upper board 4. It becomes difficult before it installs it in the shroud when the terminal of an independent pin type of the right and left is installed it.